a modern Lodge Lighting (store)
   urban contemparary| southwest | metal lighting for the clean, modern rustic lodge look
PRODUCT SEARCH:
Home |  View Lights by Category |  Ordering Information |  About Us |  Blog |  Contact Us |  Register/Log-In
Home > General Product Information

GENERAL PRODUCT INFORMATION

Jump to section:

BASIC INFORMATION

All of our light fixtures are rated as 120-volt, AC. Each fixture comes complete with all hardware required for installation. In order to keep our prices and shipping costs as low as possible, some lights require minor assembly, usually not requiring more than 30 minutes to an hour to complete. Lodge Lighting reserves the right to make minor improvements to the products presented on this website in order to better serve the needs of our users. Accordingly, some products, along with their respective specifications, may change over time.

UL Approval:

All of our lights are UL Listed for US and Canadian markets, which means that we follow rigid standards developed by Underwriters Laboratories (UL). These standards include: using UL approved parts and components, following prescribed construction and wiring guidelines and having monthly UL tests and inspections. Using UL approved lights is important not only for safety reasons, but also to meet local building codes. Only those fixtures indicated as exterior lights are UL approved for wet locations, which means they can be used either outdoors or indoors. All other fixtures are approved for indoor locations or an outdoor location protected from direct rain (i.e. "a damp" location.) All our fixtures come with a "C-UL Listed" label.

Item Numbers:

An item number consists of a product number, diffuser material choice (if applicable), hanging choice (if applicable), and a finish choice. This information must be provided when ordering.

Dimensions:

We round dimensions off to the nearest inch. Thus, measurements will vary slightly from what is presented within each product description. We also reserve the right to make minor alterations to a design to improve the light.

H - Fixture body height (excluding chain that runs from the fixture to the ceiling, where applicable)
W - Fixture body width (excluding shade)
D - Diameter of fixture body
TM - Top of fixture to center of mounting point for wall fixtures
L - Length of fixture for island lights.

Bulb Types:

Bulbs are generally not included in any light fixture unless otherwise noted. Although maximum Wattages are shown in the product descriptions, lower Watt bulbs may be used.

A19 Standard medium-base household bulbs
A21 Standard medium-base household bulb
A21-3way Standard medium-base household bulb for a portable lamp.
B11: Medium-base torpedo style bulb
C: Candelabra base bulb
G4: Halogen Bulb, low voltage
GU10: Halogen Reflector Bulb (included with fixture)
G16: Candelabra base, globe style bulb
G25: Candelabra base, globe style bulb
JD: Halogen bulb for E11 base
PAR20: Medium-base reflector bulb
T10: Tubular Medium Base
GU24: Compact Fluorescent with Electronic Ballast
13W = 60W Incandescent Equivalent
18W = 75W Incandescent Equivalent
26W = 100W Incandescent Equivalent

Compact Fluorescent (CF):

For meeting the latest building code requirements in commercial applications, we can build many of our fixtures to include permanent, hard-wired electronic compact fluorescent ballasts and photometric cells. For the standard compact fluorescent option, we charge an additional $8 per socket, for which we will wire the fixture to use GU24 base compact fluorescent bulbs in 13W, 18W and 26W depending on the fixture. For applications requiring 120V four pin compact fluorescent socket or high power factor 277V ballast, please contact us for a custom quote.
For residential applications without special building code restrictions, we recommend using the screw-in compact fluorescent bulbs, which are now made to replace an A19, B11, C-type or even reflector bulbs without difficulty.

PRODUCT OPTIONS & ACCESSORIES (Extra charges may apply)

For certain fixtures, there are other options and accessories that will be presented on the product detail page. The following section describes these options and accessories. Note: These options and accessories are not available for every fixture, only when indicated in the individual product descriptions. Prices shown are list prices.

Deep Pan Option (DP):

Specify this option when ordering the Sehome Sconce for the deep mounting pan option. This option is recommended when the installation location is not flat. Additional $15 charge.

Inverted Glass Option (IG):

Specify this option to have the open end of the glass pointed up instead of down. This option is only applies to fixtures with a glass bell and only where the fixture will be installed indoors. No Additional charge.

Switch Option (SW):

Specify this option to add an on/off switch to any sconce. Depending on the fixture, this switch will be a turn knob either on the backplate or built into the socket. Additional $15 charge.

Plug-in Option (P):

This option is available for selected wall fixtures. It includes a 8’ brown or black power cord with a plug. If the fixture does not already have a switch, then the cord will have one. Applies where indicated in product descriptions. Not for use on exterior locations. Additional $15 charge.

Reverse Image Option (R):

Specify this option when ordering for selected fixtures and we will reverse image the entire fixture. Only available where indicated in product descriptions. Additional $15 charge.

Curved Pine Cone Arms (Crestline and Ridgemont only):

These arms are offered on our Crestline and Ridgemont chandeliers and semi-flush lights. Please specify finish color when ordering.

17 inch bowls H17 $90
23 inch bowls H23 $110
27 inch bowls H27 $130
35 inch bowls H35 $160
Oval bowls H42 $210
47 inch bowls H47 $210

Compact Fluorescent (CF) Option:

For meeting the latest building code requirements in residential and commercial applications, we can build many of our fixtures to include permanent, hard-wired electronic compact fluorescent ballasts and photometric cells. Specify this option when ordering for selected fixtures and we will replace the incandescent socket(s) and the fixture will be wired to use GU24 base compact fluorescent bulbs in 13W, 18W and 26W depending on the fixture. Using this option will also make the fixture Energy Star Compliant. For applications requiring 120V four pin compact fluorescent socket or high power factor 277V ballast, please contact us for a custom quote. For residential applications without special building code restrictions, we recommend using the screw-in fluorescent bulbs which are now made to replace an A19, B11 or even reflector bulbs without difficulty. Additional $8 per socket charge.

Bottom 3D Pine Cone Kit (BP466):

This is a decorative feature that can be added to certain lights where noted. Specify finish color when ordering. Only available where indicated in product descriptions. $40

Swag Kit (CK410):

Swag Kit includes two ceiling hooks, 9 feet of chain and a plug. Please specify finish color when ordering. $36

Vaulted Ceiling Kit - (CK420):

Vaulted ceiling Kit, which converts a flat ceiling mount fixture to one that can be hung from a vaulted ceiling. Please specify series and finish color when ordering, for example, CK420-A489-27 means a Vaulted Ceiling Kit for a Ridgemont Semi-flush series in Rustic Brown Finish. $18

Vaulted Ceiling Kit - Chain Billiard (CK421):

This Kit is for converting the Chain Billiard lights to one that can be hung from a vaulted ceiling. It includes a 3’ chain, plate and canopy. Please specify finish color when ordering. $48

Vaulted Ceiling Kit - Double Stem (CK422):

Square vaulted ceiling Kit, which converts a double stem, flat ceiling mount fixture to one that can be hung from a vaulted ceiling. Please specify finish color when ordering. $48

Extra Chain Kit (CK450):

Extra three feet of chain. All chain drop fixtures are shipped with 3 feet of chain. In order to accommodate higher than normal ceiling heights, we supply an extra 10’ of lead wire on all hanging fixtures, for a total of 13 feet of wire. This means you can order up to 3 of these kits for wiring included with the fixture. Please specify finish color when ordering. $12

Direct Mount Ceiling Kit (CK470):

Direct mount ceiling Kit, which can convert chain hung foyers and chandeliers into one that can be mounted to a flat ceiling. Please specify series, e.g., CK470-A403 is for the Crestline Chandelier Small, and finish color when ordering. $30

Top Diffuser Kit (CK480):

For select chandeliers and foyers, this kit consists of a removable diffuser for the top of the bowl to shield the bulbs from view from above. The kit includes an Almond mica shade and all necessary mounting hardware. Please specify series when ordering. $50

Post Mount Pedestal Kit (EK520):

Includes 4 screws for mounting our post mount light to a pillar or fence. Please specify which fixture this is used on and the finish color when ordering. $30

Telescoping Stem Extension Kits - Single Stem:

Fixtures using single stems are shipped standard with an adjustment range of 15" to 30". For longer lengths, we provide the following kits. Please specify finish color when ordering.
Adjust stem length Number List
30 to 48 inches PK210 $12
30 to 78 inches PK211 $24
30 to 108 inches PK212 $36
30 to 138 inches PK213 $48

Telescoping Stem Extension Kits - Double Stem Kits:

Fixtures using double stems are shipped standard with an adjustment range of 15" to 30". For longer lengths, we provide the following kits. Please specify finish color when ordering.

Adjust stem length Number List
30 to 48 inches PK460 $18
30 to 78 inches PK461 $30
30 to 108 inches PK462 $42
30 to 138 inches PK463 $54

Copyright 2014 LodgeLighting.com. All rights reserved.
All lighting products on this website were created from original artwork and are copyrighted.
    LodgeLighting.com
    PO Box 31397 · Bellingham WA 98228
    v:360-393-3022 · f:360-752-1612
Credit Card Logos
SSL Certificate Link